How to Check the Oil on Zenith Hylo Table

Posted by "Jay the Table Guy" on Jul 11th 2023

How to Check the Oil on Zenith Hylo Table

NON Dipstick

1. Lower table to flat down position.
2. Remove Oil Cap
3. Use a 5 Inch screwdriver and make a mark (magic maker) at 1 inch and 1.5 Inches from the handle.
4. Raise pelvic cushion 4 to 5 inches with handles.
5. Drop in screwdriver till flat against oil reservoir tank.
6. Oil should be BELOW 1 inch mark and ABOVE 1.5 inch mark.
7. If oil is below 1.5 inch mark, the table will struggle and be noisy to raise. If oil is above 1 inch mark, table will overflow when lowered to flat position.

Save Yourself TIME when checking the oil on your Zenith Hylo Table by Buying the Dip Stick Upgrade!

See the links at the bottom of the page.

How to Check the Oil on Zenith Hylo Table with Dipstick

1. Raise table to TOP hylo position.
2. Remove Oil Cap. Wipe clean.
3. Reinstall cap and screw in. Remove and check the oil level.
4. Oil level should be close or ON black mark on dipstick.
5. Oil is not touching dipstick; the table will struggle and be noisy to raise. If Oil is above dipstick black mark, the table will overflow when lowered to flat position.

Click the links to purchase online now!

Zenith Table Tune Up Kit: Oil, Dipstick, Grease, & Chrome Polishing Pads https://chiropractictableparts.com/zenith-chiropra...