Loading... Please wait...

Categories

our newsletter

Account Navigation

  • Gift Certificates
  • Wish Lists
  • My Account
  • Order Status
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6

Spinalator Rollers Replacement

Your Price:
$299.99
SKU:
SRR1
Weight:
20.00 LBS
Quantity:

 

Product Description

Spinalator Roller - Replacement Spinalator Rollers


 Spinalator Rollers - Replacement Spinalator Roller - Set 
New Rollers are Black, Higher Density Foam!
They Include New Style steel one piece bearing & bolts for easy install.

Includes Everything Needed Below

Three Spinalator Rollers

3 Steel bearings

6 bolts

6 lock washers

 

These replacement Spinalator rollers will fit all spinalators with electric elevation. (Shown Below)

 

sp2.jpg

 

If you have an old style table with the manual wheel elevation (shown below) , you will need the update kit.


The picture below shows an oldest style Spinalator with Manual Roller elevation.It uses a very OLD  3 arm, mounting system.You MUST purchase the oldstyle UPDATE KIT!!!
(Shown Below)

chattanooga-spinaltor-version-1a.png   

If you are not sure contact us at256-245-8390
 
 
 
Replacement Spinalator Rollers Instructions
 
  1. Remove top from spinalator by unclamping end brackets.
  2. Make sure hands are clear of any moving parts and turn table timer on. Elevate Roller to top height
  3. Turn Roller rotation switch OFF, with one roller centered to the top of the triangle assembly.
  4. UNPLUG TABLE - Some spinalators have a auto retract to lower rollers. Failure to UNPLUG table will let the roller retract automatically. This could cause bodily injury or tear up your new spinalator rollers! This will also keep you from getting shocked if you happen to touch a exposed wire.
  5. Remove Bolt from Roller and remove old spinalator Roller. Install new Spinalator roller, New style roller will have a easy one piece bearing and dual bolt for ends. Make sure and use provided Lock Washer!!!
  6. Ensure Hands, tools, and anything else is clear of rollers then plug up table. Turn spinalator rotation switch on and cycle roller to next top height and shut off rotation switch again.
  7. UNPLUG TABLE - Some spinalators have a auto retract to lower rollers. Failure to UNPLUG table will let the roller retract automatically. This could cause bodily injury or tear up your new spinalator rollers! This will also keep you from getting shocked if you happen to touch a exposed wire.
  8. Ensure Hands, tools, and anything else is clear of rollers then plug up table. Turn spinalator rotation switch on and cycle roller to next top height and shut off rotation switch again.
  9. Final Roller - Remove Bolt from Roller and remove old spinalator Roller. Install new Spinalator roller, New style roller will have a easy one piece bearing and dual bolt for ends. Make sure and use provided Lock Washer!!!
  Check Chain Tension on Spinalator Roller rotation motor chain while top is removed. The Spinalator Roller tension should be like a bicycle chain; tight but not over tightened, to stretch the chain! Lube Chain with a Teflon lube. WD 40 will stop a squeak but is water based and will evaporate quickly! If you have movement in the roller after tightening chain, check spinalator sprocket for a broken weld....

 

Spinalator Rollers,Replacement Spinalator Rollers,Spinalator Roller,Replacement Spinalator Roller,spinalator roller,spinalator roller table part,spinalator table roller,Spinalator Rollers,Replacement Spinalator Rollers,Spinalator ist Roller,Replacement Spinalator table  Roller ,spinalator table roller,spinalator roller table part,spinalator table rollers</p

Find Similar Products by Category

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write review

Back to Top

Click the button below to add the Spinalator Rollers Replacement to your wish list.